1400 Square Foot Ranch House Plan Country Design | Affordable Home Plans
Split-bedroom ranch home floor plan. Enjoy the large master suite with a bath (jet tub for her), and a half (shower for him). Large two car garage with separate storage area. Covered front porch and rear patio. Large master suite and walk-in closet. Raised bar in kitchen. This affordable, yet efficient one story ranch home design is a great value and a very effective use of space. With the available basement option this plan is suitable for a growing family.
1400 Total Living Area 1400 Main Level 3 Bedrooms 2 Full Baths 2 Car Garage 54' W x 47' D
1 Set: $1,075.00 5 Sets: $1,200.00 5 Sets plus PDF Print Set: $1,375.00 PDF File: $1,300.00 CAD File: $1,725.00
Foundation Plan and Details (plan scale: 1/4" = 1'-0"; details: 3/4"=1'-0")
Short-form FHA/VA Specifications form
License to Build
Plans range in number of pages from 5 to 13 pages on 24" x 36" sheets. Printed on a wide-format xerox machine to guarantee quality of the prints and very good legibility. Prints are printed on white bond paper. Reproducible plans are printed on eraseable vellum.
This Plan is a USDA Rural Development Certified Plan
Want to make changes?
Our modification team is ready to help you adjust this plan to fit your needs. Receive a FREE modification estimate by completing this form.
Cost To Build
No Risk Offer: Order the QUICK-Cost-To-Build now and when you do decide to order any house plan, $19.95 will be deducted from your order! *
Get more accurate results, quicker! No need to wait for a reliable cost.
Get a detailed cost report for your home plan with over 70 lines of summarized cost information in under 5 minutes!
Cost report for your zip code. (the zip code can be changed after you receive the online report)
Estimate 1, 1-1/2 or 2 story home plans. **
Interactive! Instantly see the costs change as you vary quality levels Economy, Standard, Premium and structure such as slab, basement and crawlspace.
QUICK Cost-To-Build estimates have the following assumptions:
QUICK Cost-To-Build estimates are available for single family, stick-built, detached, 1 story, 1.5 story and 2 story home plans with attached or detached garages, pitched roofs on flat to gently sloping sites.
QUICK Cost-To-Build estimates are not available for specialty plans and construction such as garage / apartment, townhouse, multi-family, hillside, flat roof, concrete walls, log cabin, home additions, and other designs inconsistent with the assumptions outlined in Item 1 above.
User is able to select and have costs instantly calculate for slab on grade, crawlspace or full basement options.
User is able to select and have costs instantly calculate different quality levels of construction including Economy, Standard, Premium. View Quality Level Assumptions.
Estimate will dynamically adjust costs based on the home plan's finished square feet, porch, garage and bathrooms.
Estimate will dynamically adjust costs based on unique zip code for project location.
All home plans are based on the following design assumptions: 8 foot basement ceiling height, 9 foot first floor ceiling height, 8 foot second floor ceiling height (if used), gable roof; 2 dormers, average roof pitch is 12:12, 1 to 2 covered porches, porch construction on foundations.
Summarized cost report will provide approximately 70 lines of cost detail within the following home construction categories: Site Work, Foundations, Basement (if used), Exterior Shell, Special Spaces (Kitchen, Bathrooms, etc), Interior Construction, Elevators, Plumbing, Heating / AC, Electrical Systems, Appliances, Contractor Markup. View a LIVE Sample Cost Report.
QUICK Cost-To-Build generates estimates only. It is highly recommend that one employs a local builder in order to get a more accurate construction cost.
All costs are "installed costs" including material, labor and sales tax.
* Limit one $19.95 credit per complete plan package order.
** Available for U.S. only.
Previous Q & A
Previous Questions and Answers
Q:What are the floor joist sizes and how far apart are the centers? I'm going to do a poured foundation for the basement. Is it drawn block? Does the plan show notes for a sprinkler system? Are the interior walls 2x4?
A:Hello, This plan has 16" thick prefab floor joists "as per manufacturer's specs" for floor joists, and does have 8" thick poured in place concrete exterior basement walls. We recommend 16" on center spacing, but the floor joist manufacturer may specify some other spacing. You could substitute regular lumber for the floor system if you wish.
There is one row of interior support posts with a beam running left to right through the middle, approx. 14'-8" off the rear wall. All floor joists run front to rear.
There is one 36"x60" basement egress window with optional prefab window well.
There is nothing in the plans concerning sprinkler systems. Most of the interior walls are 2x4, except for the plumbing walls behind toilets and washer/dryer are 2x6.
We have this plan available with either 2x4 or 2x6 exterior walls, with basement foundation option. So unless you request 2x6 exterior walls when you order, you would get the standard 2x4 exterior wall version.
Date Posted: 14-Mar-19
Q:Do you have more details on sizes of closets, bathrooms, laundry room, and porches? Thank you
A:Hello, Sure. Here are the sizes for the areas not already listed online.
Master bath tub area- 6'x7'-6"
Master toilet area- 6'x3'
master shower area- 6'x6'-4"
Master closet- 6'-5"x7'-4"
Entry hall- 3'-8x7'-4'
Hall on right side of house- 3'-6"x5'
Bed 2 and 3 closets- 8'x2'-2"
hall bath- 8'x5'
We will get that image replaced with another that has all the room sizes. Sorry they were missing.
Date Posted: 01-Nov-18
Q:Can I get a material list with 2x6 exterior walls,instead of the 2x4 ,and would that cost extra along with the 5 sets of plans
A:Hello, Yes, it would cost extra. There is no need to pay for that though. The materials list clearly lists what studs are for the walls, so all you have to do is mark though the "4" and make it a "6". The quantity and spacing of the studs will not change. Save your money on that.
Date Posted: 30-May-14
Q:how many outlets would this house have?
A:Hello, Its designed to meet the International Residential Code. Approximately 53 duplex outlets inside and out combined. Have a great day.
Date Posted: 29-Nov-12
Q:What size roof truss will I need in order to someday make the attic area into a bed room or office? Our contractor wants to use a 6/12 truss. Will this work, or do we need to go with a 8/12? Thank you
A:Hello, The distance from the front of the front porch to the rear of the dining room is about 32'-6". So an 8/12 roof slope would give you an area in the center about 16 feet deep by 54 feet wide, thats taller than 5 feet. There would only be about 8'-6" in the middle high enough to have a full 8 foot ceiling. So I would definitely not use a 6/12, and an 8/12 is only marginal. It is very important to consider where you would add stairs in the future, since the top of the stairs would have to end up in the area taller than 6'-8, which would be in the center 10'-6" of the house. The only place I see where stairs would work is the right wall of the dining room, starting at the rear, headed up towards the front. However this would make your dining room useless since the stairs would be 4 feet wide. So if you wish to add stairs in the future, widen the dining/great room by four feet. Remember a bedroom MUST have a window, so you would need to locate the bedroom over on the far left or far right so the window could go in the gable ends. Thanks.
Date Posted: 27-Sep-12
Q:what would house look like with pony wall basement
A:Hello, I am not sure what you mean by "pony wall basement". Are you talking about a basement that sticks out of the ground a few feet, and the rest of it is underground? If that is what you mean, It would look fine. All houses look better elevated two to three feet off the ground. Houses should have a bottom, middle and top. The bottom is the foundation area, the middle is the walls, and the top is the roof. This house is currently shown on a slab on grade, with no bottom section, which certainly does not add to the curb appeal. It was done that way to be economical to build. It could easily be built on whatever type foundation was called for. We do already offer it with a basement option. The builder would just set the basement level on site, so it could stick out of the ground however far it needed to. Then you would just add steps in the garage to get inside the house, or build the driveway up as needed, or both to correct for the taller elevation. Have a great day and God bless!
Date Posted: 08-Aug-11
Q:Can I make modifications to this plan?
A:Yes you can! Please click the "Modifications" tab above to get more information.
Q:What is the estimated price to build this plan?
A:The national average for a house is running right at $125.00 per SF. You can get more detailed information by clicking the Cost-To-Build tab above. Sorry, but we cannot give cost estimates for garage, multifamily or project plans.
Ask A Question
Ask the Designer
Got a question about this plan? Ask The Designer any question you may have. NOTE: If you have a plan modification question, please click on the Modifications tab above.
Designers/Architects that are interested in marketing their plans with us, please click here
Photographs may show modified designs. Image quality may be compromised.
Buy This Plan
Have any Questions? Our Sales Staff is able to answer most questions and take your order over the phone. Call 1-800-482-0464 (U.S. customers) or 1-800-361-7526 (Canadian customers). If you prefer to order online click the button below.