-main floor paln
-upper floor plans (if applicable)
-truss diagrams and building section
-typical wall section
BCIN # for Ontario customers is available at an additional charge
-House plans with or without garage and / or apartment $300
-Multi-unit plans $400
-All other plans $150
-Garage plans with NO heating elements, $100 charge for BCIN
If you are purchasing a BCIN number for Ontario customers, and wish to purchase the PDF, a copy per Ontario rules must be mailed as well. There is no charge for the actual copy, but shipping on the copy must be purchased.
Want to make changes?
Receive a FREE modification estimate in one of 3 ways. Our modification team is ready to help you adjust any plan to fit your needs. The ReDesign process is simple and estimates are free!
QUICK Cost-To-Build estimates have the following assumptions:
QUICK Cost-To-Build estimates are available for single family, stick-built, detached, 1 story, 1.5 story and 2 story home plans with attached or detached garages, pitched roofs on flat to gently sloping sites.
QUICK Cost-To-Build estimates are not available for specialty plans and construction such as garage / apartment, townhouse, multi-family, hillside, flat roof, concrete walls, log cabin, home additions, and other designs inconsistent with the assumptions outlined in Item 1 above.
User is able to select and have costs instantly calculate for slab on grade, crawlspace or full basement options.
User is able to select and have costs instantly calculate different quality levels of construction including Economy, Standard, Premium. View Quality Level Assumptions.
Estimate will dynamically adjust costs based on the home plan's finished square feet, porch, garage and bathrooms.
Estimate will dynamically adjust costs based on unique zip code for project location.
All home plans are based on the following design assumptions: 8 foot basement ceiling height, 9 foot first floor ceiling height, 8 foot second floor ceiling height (if used), gable roof; 2 dormers, average roof pitch is 12:12, 1 to 2 covered porches, porch construction on foundations.
Summarized cost report will provide approximately 70 lines of cost detail within the following home construction categories: Site Work, Foundations, Basement (if used), Exterior Shell, Special Spaces (Kitchen, Bathrooms, etc), Interior Construction, Elevators, Plumbing, Heating / AC, Electrical Systems, Appliances, Contractor Markup. View a LIVE Sample Cost Report.
QUICK Cost-To-Build generates estimates only. It is highly recommend that one employs a local builder in order to get a more accurate construction cost.
All costs are "installed costs" including material, labor and sales tax.
* Limit one $19.95 credit per complete plan package order.
** Available for U.S. only.
Previous Q & A
Previous Questions and Answers
Q:What is the height from the walk out basement to the top of the roof? My HOA states the house can’t exceed 2.5 stories and 35 feet.,
It is 39’-6’’ from the highest point to the ground level of the walkout foundation
Date Posted: 20-Jul-20
Q:Could you provide me with the overall dimensions of the home excluding the deck?
For this house you can add the deck that is 36’ x 10’
Date Posted: 28-Apr-20
Q:Is the bill of materials for this plan a pdf format or spreadsheet format?
The material list is sent in .pdf format
Date Posted: 11-Nov-19
Q:Do you happen to have any actual interior photos of this house I could see ?
Actually no, we unfortunately have no interior photos for this house plan.
Date Posted: 10-Oct-19
Q:what are the dimensions of the walk out basement? There wasn't a floor plan for it on this site.
The basement is the same dimension as the main floor but with no divisions.
The square footage is 893 square feet.
Date Posted: 16-Sep-19
Q:Were are the hot water heater and furnace/AC supposed to be located in this plan?
The hot water heater is located in the basement.
For the furnace and AC, the customer will need to decide where they want it but it can quite easily be planned in the basement.
Date Posted: 16-Sep-19
Q:So can you tell me if the trusses are in sections to be assembled at the site, or if it one unit. if so it seems they would be difficult to transport. I am in preliminary stages of budget prep and to be able to get a ballpark quote from a truss manufacturer would be ideal. there is nothing you can provide?
Here is the answers for this customer :
The trusses in this particular case comes in 2 separate sections with a beam to attach the 2.
However, it is better if he checks in locally with a truss manufacturer.
The truss diagrams we provide are only shown for schematic purpose. It is the manufacturer’s responsibility to design and conceive the trusses to meet and comply local and code regulation.
Date Posted: 06-Sep-19
Q:Hello: If I were to purchase the bill of materials for the plan, would it include enough detail on the trusses so as to get a price quote from a local truss manufacturer? Also, are they build as one unit, or are they in sections to be assembled at the site?
Unfortunately the truss information is on the plan only and it’s with the plan that the truss manufacturer can quote.
We specialize in house plans only and therefore there is no assemble for our plans.
Date Posted: 05-Sep-19
Q:Can you tell me what the wind load calculation is for this plan, and the height from the lowest point of a walk out basement to the peak of the roof (or perhaps the fireplace chimney)?
Our plans do not include wind load calculation, this would have to be checked into locally with an engineer.
Here are the measurements requested :
Top of ridge to walkout foundation(lowest point): 38’-10’’
Top of ridge to finish grade : 39’-6’’
Top of chimney to walkout foundation : 41’-10’’
Top of chimney to finish grade : 42’-6’’
Date Posted: 26-Aug-19
Q:I understand that he ceiling on the second floor is 8’-0’’ and starts sloping where the dotted lines are, but I want to make sure I have good understanding of the plan. So, if the dotted line represents the start of the slope, how tall is the wall that the beds are up against?
The lowest height of the sloped ceiling is approximately 4’-6’’
I hope this helps!
Date Posted: 22-Aug-19
Q:Do you know what the roof snow load calculation on this plan would be?
The snow load for this plan is 75 pounds per square ft.
Hope this helps!
Date Posted: 20-Aug-19
Q:What is the exterior pitch of the roof, and what is the interior pitch? I am assuming the trusses are some type scissor truss?
The roof pitch for this plan is 14/12.
The trusses are manufactured trusses.
Hope this helps!
Date Posted: 12-Nov-18
Q:Thanks for the response, however I don’t believe that is correct. The “roof type” in the description says “unknown”. It clearly is not a truss. It is some type of “open beam” construction, using large beams, either glue lam of solid wood with an unknown type of insulation on top of likely 2x6 T&G ceiling boards. Can you see if you can get the details as it makes a big difference in construction costs. Thank you, Doug Bishop
The exterior beams are decorative only but the roof is really manufactured trusses.
Date Posted: 21-Feb-18
Q:What is the roof construction type?
Our roof structures are manufactured trusses.
I hope this helps!
Date Posted: 19-Feb-18
Q:What are the room ceiling heights of this house plan
The ceiling height on the first level is 8’-0’’except the cathedral part in the kitchen, dining room and living room that is ±25’-7’’
The second level is 8’-0’’
Date Posted: 09-Oct-17
Q:Can I make modifications to this plan?
A:Yes you can! Please click the "Modifications" tab above to get more information.
Q:What is the estimated price to build this plan?
A:The national average for a house is running right at $125.00 per SF. You can get more detailed information by clicking the Cost-To-Build tab above. Sorry, but we cannot give cost estimates for garage, multifamily or project plans.
Ask A Question
Got a question about this plan? Ask the Designer any question you may have. NOTE: If you have a plan modification question, please click on the Plan Modifications tab above.
Designers/Architects that are interested in marketing their plans with us, please click here
Photographs may show modified designs. Image quality may be compromised.
Buy This Plan
Have any Questions? Our Sales Staff is able to answer most questions and take your order over the phone. Call 1-800-482-0464 (U.S. customers) or 1-800-361-7526 (Canadian customers). If you prefer to order online click the button below.