|Total Living Area:||1311 sq ft|
|Main Living Area:||1311 sq ft|
|See our garage plan collection. If you order a house and garage plan at the same time, you will get 10% off your total order amount.|
Walkout Basement - * $525.00
Total Living Area may increase with Basement Foundation option.
|Number of Stories:||1|
|Max Ridge Height:||20'0 from Front Door Floor Level|
|Primary Roof Pitch:||8:12|
|Porch:||120 sq ft|
|Main Ceiling Height:||9'|
View an actual, LIVE cost report. This report is for demo purposes only. Not plan specific.
A: Tankless water heaters are located on the exterior of the home, close to the laundry room and bath 2.
A: Currently this plan is 2018 IRC
A: Yes, on the interior footings.
A: This plan has a crawlspace stem wall on the exterior and shows the interior footings.
A: The walkout basement has 2x12 floor joists supported with columns and beams—Approx. 8 ft high basement ceiling. There are doors and windows to the rear of the walkout basement foundation. Unfortunately, we do not have a standard basement foundation at this time.
A: The second bath is 10’-6” wide and 5’-6” deep
A: There would be room for a bonus room using attic trusses…
A: Yes there is attic space but it’s trussed, so it you want real attic space to store anything in I would sugguest having attic trusses designed and you would have a huge amount of area.
A: Walk in closet in the master bedroom is 6ft wide and 9.4ft deep.
A: Pre-engineered roof trusses are on the plans so the design for the trusses are not included. Crawlspace inteior piers are located but the exterior is a cmu chainwall not individual piers
A: NO, but if you are allowed on-site changes, your builder could adjust the ceilings for you.
A: One time and $275 per additional build/license.
A: 20’x6’ – front porch The rear deck is included in the full dimensions.
A: Closet – 5’-0” x2’-4” deep There are two tankless water heaters – one behind the house, outside the laundry room, and the other outside the bath2. The roof is designed as a pre-engineered roof truss system locally – so they adjust for your snow load
A: Approx. 11 - 24”x36” sheets
A: We only sell a materials list with a plan order, sorry. I also do not think they list EVERY nail and screw in the house, just the major parts, studs, shingles, deck and deck screws, etc.
A: Sorry, I can’t send out a to scale floor plan, and since you have mods done by a third party, you would need to get a price for any mods from them.
A: The plans will print on 24" x36" sheet at scale..floor plans will be 1/4"=1'-0"
A: If you can find a 5’ whirlpool it will fit right in, if not we could adjust the master bath to fit the tub you would like for $175
A: Yes you can! Please click the "Modifications" tab above to get more information.
A: The national average for a house is running right at $125.00 per SF. You can get more detailed information by clicking the Cost-To-Build tab above. Sorry, but we cannot give cost estimates for garage, multifamily or project plans.
If you find the exact same plan featured on a competitor's web site at a lower price, advertised OR special SALE price, we will beat the competitor's price by 5% of the total, not just 5% of the difference! To take advantage of our guarantee, please call us at 800-482-0464 or email us the website and plan number when you are ready to order. Our guarantee extends up to 4 weeks after your purchase, so you know you can buy now with confidence.
Have any Questions? Please Call 800-482-0464 and our Sales Staff will be able to answer most questions and take your order over the phone. If you prefer to order online click the button below.Add to cart