QUICK Cost-To-Build estimates have the following assumptions:
QUICK Cost-To-Build estimates are available for single family, stick-built, detached, 1 story, 1.5 story and 2 story home plans with attached or detached garages, pitched roofs on flat to gently sloping sites.
QUICK Cost-To-Build estimates are not available for specialty plans and construction such as garage / apartment, townhouse, multi-family, hillside, flat roof, concrete walls, log cabin, home additions, and other designs inconsistent with the assumptions outlined in Item 1 above.
User is able to select and have costs instantly calculate for slab on grade, crawlspace or full basement options.
User is able to select and have costs instantly calculate different quality levels of construction including Economy, Standard, Premium. View Quality Level Assumptions.
Estimate will dynamically adjust costs based on the home plan's finished square feet, porch, garage and bathrooms.
Estimate will dynamically adjust costs based on unique zip code for project location.
All home plans are based on the following design assumptions: 8 foot basement ceiling height, 9 foot first floor ceiling height, 8 foot second floor ceiling height (if used), gable roof; 2 dormers, average roof pitch is 12:12, 1 to 2 covered porches, porch construction on foundations.
Summarized cost report will provide approximately 70 lines of cost detail within the following home construction categories: Site Work, Foundations, Basement (if used), Exterior Shell, Special Spaces (Kitchen, Bathrooms, etc), Interior Construction, Elevators, Plumbing, Heating / AC, Electrical Systems, Appliances, Contractor Markup. View a LIVE Sample Cost Report.
QUICK Cost-To-Build generates estimates only. It is highly recommend that one employs a local builder in order to get a more accurate construction cost.
All costs are "installed costs" including material, labor and sales tax.
* Limit one $19.95 credit per complete plan package order.
** Available for U.S. only.
Previous Q & A
Previous Questions and Answers
Q:Looks like a good start but does the plan comes with: - window rough opening’s or at least the size of them - Structural cross-section for the type of beams/headers needed - most of all engineering which is close to 80 or 90 pounds per square foot in Francestown, NH -The engineer and stamp should be on the plan, not a copied plan with a stamp. The original must be on there so it can be accepted by the town. - Is the foundation of full height foundation? - ask the company if they can customize it if not we may be able to get a letter from an engineer to customize the foundation for a hillside
A:This plan contains the window openings in the floorplans. These plans do not come with an engineer stamp. That would have to be obtained by a local engineer.
Date Posted: 26-Oct-20
Q:Where is the utility room located for HVAC, water heater, washer and dryer?
A:The suggested location for the water heater is underneath the stairs leading up to the loft.
There isn't a suggested space for the HVAC system, however, there is some space up in the loft that is labeled as storage that may suit as the location for the HVAC (otherwise, a concrete pad located outside could work as well). Many times, the HVAC contractor will decide where the optimum placement for the main HVAC unit is located as part of their design.
The suggested place for the W/D would be in the alcove right next to the bathroom on the left (the bedroom door is directly to the right as you enter the bathroom).
Date Posted: 31-Jul-17
Q:Would like to see the view of the back side of the house
A:I checked and we have not received any additional images or photos of this house plan. We do our best to publish them as soon as they are received, unfortunately people either forget about us or just get too busy after they build, as we do not get a lot of photos back from our customers.
Since we rely on our customers to send us pictures of our as-built house plans, if customers don't send photos, we don't have any others than what you see on our website.
Date Posted: 26-May-17
Q:Can I make modifications to this plan?
A:Yes you can! Please click the "Modifications" tab above to get more information.
Q:What is the estimated price to build this plan?
A:The national average for a house is running right at $125.00 per SF. You can get more detailed information by clicking the Cost-To-Build tab above. Sorry, but we cannot give cost estimates for garage, multifamily or project plans.
Ask A Question
Got a question about this plan? Ask the Designer any question you may have. NOTE: If you have a plan modification question, please click on the Plan Modifications tab above.
Designers/Architects that are interested in marketing their plans with us, please fill out this form