QUICK Cost-To-Build estimates have the following assumptions:
QUICK Cost-To-Build estimates are available for single family, stick-built, detached, 1 story, 1.5 story and 2 story home plans with attached or detached garages, pitched roofs on flat to gently sloping sites.
QUICK Cost-To-Build estimates are not available for specialty plans and construction such as garage / apartment, townhouse, multi-family, hillside, flat roof, concrete walls, log cabin, home additions, and other designs inconsistent with the assumptions outlined in Item 1 above.
User is able to select and have costs instantly calculate for slab on grade, crawlspace or full basement options.
User is able to select and have costs instantly calculate different quality levels of construction including Economy, Standard, Premium. View Quality Level Assumptions.
Estimate will dynamically adjust costs based on the home plan's finished square feet, porch, garage and bathrooms.
Estimate will dynamically adjust costs based on unique zip code for project location.
All home plans are based on the following design assumptions: 8 foot basement ceiling height, 9 foot first floor ceiling height, 8 foot second floor ceiling height (if used), gable roof; 2 dormers, average roof pitch is 12:12, 1 to 2 covered porches, porch construction on foundations.
Summarized cost report will provide approximately 70 lines of cost detail within the following home construction categories: Site Work, Foundations, Basement (if used), Exterior Shell, Special Spaces (Kitchen, Bathrooms, etc), Interior Construction, Elevators, Plumbing, Heating / AC, Electrical Systems, Appliances, Contractor Markup. View a LIVE Sample Cost Report.
QUICK Cost-To-Build generates estimates only. It is highly recommend that one employs a local builder in order to get a more accurate construction cost.
All costs are "installed costs" including material, labor and sales tax.
* Limit one $19.95 credit per complete plan package order.
** Available for U.S. only.
Previous Q & A
Previous Questions and Answers
Q:What is the snow load rating on the roof? I’m looking to build in central Maine and there is, obviously, a significant amount of snow on a yearly basis.
A:Hey, our stock plan roofs have a live load of 20 pounds per square foot. Our snow load is negligible in the South. We can do a custom change to meet your snow load code requirements.
Date Posted: 15-May-20
Q:Need to know if electrical and plumbing schematics are included in this plan.
The floor plan shows the locations of the electrical outlets, smoke alarms, carbon monoxide alarms, electrical and plumbing fixtures
Date Posted: 25-Jul-16
Q:Ok ...I will try to approach this at a different angle....with the dimensions of this plan....what would be the highest peak in the attic (center) of a 5;12, 6;12, 7;12...thank you for your patience...
A:OK here you go. 5:12=4' 3"; 6:12=5' 3"; 7:12=6' 3" measured from the top of the ceiling joist to the bottom of the ridge beam. I hope this helps
Date Posted: 22-May-15
Q:Would it be possible to put a wood burning stove in the living room.
A:Sure, we can show it for you on the plans or you can buy the wood stove then install per the manufacturer's specifications.
Date Posted: 13-Jun-14
Q:Any chance to fit washer/dryer upstairs if full basement is added? Meaning stairs take out the closet drawn? Also if you bend kitchen in L along the bathroom wall still room for dining? Table?
A:It's not possible to leave the washer and dryer upstairs as the basement stairs are located where the washer/dryer is currently located. By enlarging the house for a redesign of this area, the washer/dryer could remain on the upper level.
Date Posted: 06-Aug-13
Q:If ordered on a slab, where would the a/c unit go?
A:The HVAC air handler is located in the utility closet Kitchen/Dining room area. It is marked Furn, WH on the floor plan.
If you need more assistance let me know.
Date Posted: 02-Jul-12
Q:Where would the basement stairs go? House Plan 45310
A:The basement stairs are located in the kitchen, where the utility closet and kitchen pantry are located.
Date Posted: 03-May-10
Q:Can I make modifications to this plan?
A:Yes you can! Please click the "Modifications" tab above to get more information.
Q:What is the estimated price to build this plan?
A:The national average for a house is running right at $125.00 per SF. You can get more detailed information by clicking the Cost-To-Build tab above. Sorry, but we cannot give cost estimates for garage, multifamily or project plans.
Ask A Question
Ask the Designer
Got a question about this plan? Ask The Designer any question you may have. NOTE: If you have a plan modification question, please click on the Modifications tab above.
Designers/Architects that are interested in marketing thier plans with us, please click here
Have any Questions? Our Sales Staff is able to answer most questions and take your order over the phone. Call 1-800-482-0464 (U.S. customers) or 1-800-361-7526 (Canadian customers). If you prefer to order online click the button below.