Plan Number 41438
Farmhouse Style House Plan 41438
1924 Sq Ft, 3 Bedrooms, 2 Full Baths, 1 Half Baths, 2 Car Garage
Quick Specs
1924 Total Living Area1924 Main Level
3 Bedrooms
2 Full Baths, 1 Half Baths
2 Car Garage
61'7 W x 61'8 D
Quick Pricing
PDF File: $1,145.005 Sets: $1,245.00
5 Sets plus PDF File: $1,445.00
Unlimited Use PDF: $1,845.00
Plan Specifications
Specifications
| Total Living Area: | 1924 sq ft |
| Main Living Area: | 1924 sq ft |
| Garage Area: | 574 sq ft |
| Garage Type: | Attached |
| Garage Bays: | 2 |
| Foundation Types: | Basement - * $395.00 Total Living Area may increase with Basement Foundation option. Crawlspace - * $200.00 Slab |
| Exterior Walls: | 2x4 2x6 - * $250.00 |
| House Width: | 61'7 |
| House Depth: | 61'8 |
| Number of Stories: | 1 |
| Bedrooms: | 3 |
| Full Baths: | 2 |
| Half Baths: | 1 |
| Max Ridge Height: | 26'2 from Front Door Floor Level |
| Primary Roof Pitch: | 9:12 |
| Roof Framing: | Stick |
| Porch: | 681 sq ft |
| FirePlace: | Yes |
| 1st Floor Master: | Yes |
| Main Ceiling Height: | 10'0 |
Special Features:
Plan Package Pricing
Pricing
Additional Notes...
10' Garage Ceiling Heights. 3179 sq ft total under roof.Available Foundation Types:
Available Exterior Wall Types:
Prices subject to approval prior to fulfillment.What's Included?
What is Included in this House Plan?
All of our stock plans are drawn to the new Louisiana building code that was enforced after Hurricane Katrina. This building code is the I.R.C. 2015.Our house plans will be sufficient for any permit office in the state of Louisiana unless you are in a high wind area which will require engineering stamp. When you purchase a plan package, you receive the license to build that plan one (1) time. The package includes: 1/4" scale floor plan which includes window & door schedules. Our floor plans are very detailed. 1/4” scale Electrical layout which includes much detail such as: Recessed lights, fan/lights, switches, outlets, cable tv & telephone locations, exterior flood light locations, weather proof outlets, heat/vent/light locations...etc. 1/4" scale front and rear elevations, and 1/8” scale side elevations. 1/4” scale foundation plans which do include floor & ceiling framing member specifications 1/4” scale HVAC/mechanical plan which should be verified by your local HVAC engineer. HVAC plans are not shown on the blueprints. HVAC system information regarding location of units, what types of units are used, and the duct layout are schematic only and should discuss with your local builder, mechanical (HVAC) contractor, and plumbing contractor. They should be able to provide you with the necessary information based on what your local building codes will allow. 1/2” scale typical wall sections and all foundation section details. Roof plans are provided with every package. This will show all roof slopes and a roof framing detail. Miscellaneous details as needed per house plan. kitchen cabinet elevations are provided.Plan Modifications
Want to make changes?
Receive a FREE modification estimate in one of 3 ways. Our modification team is ready to help you adjust any plan to fit your needs. The ReDesign process is simple and estimates are free!1. Complete this On-Line Request Form
2. Print, complete and fax this PDF Form to us at 1-800-675-4916.
3. Want to talk to an expert? Call us at 913-938-8097 (Canadian customers, please call 800-361-7526) to discuss modifications.
Note: - a sketch of the changes or the website floor plan marked up to reflect changes is a great way to convey the modifications in addition to a written list.
We Work Fast!
When you submit your ReDesign request, a designer will contact you within 24 business hours with a quote.
You can have your plan redesigned in as little as 14 - 21 days!
We look forward to hearing from you!
Start today planning for tomorrow!
Cost To Build
QUICK-Cost-To-Build Estimate
View an actual, LIVE cost report. This report is for demo purposes only. Not plan specific.
$24.95 per plan
** Available for U.S. only.
QUICK Cost-To-Build estimates have the following assumptions:
QUICK Cost-To-Build estimates are available for single family, stick-built, detached, 1 story, 1.5 story and 2 story home plans with attached or detached garages, pitched roofs on flat to gently sloping sites.QUICK Cost-To-Build estimates are not available for specialty plans and construction such as garage / apartment, townhouse, multi-family, hillside, flat roof, concrete walls, log cabin, home additions, and other designs inconsistent with the assumptions outlined in Item 1 above.
User is able to select and have costs instantly calculate for slab on grade, crawlspace or full basement options.
User is able to select and have costs instantly calculate different quality levels of construction including Economy, Standard, Premium. View Quality Level Assumptions.
Estimate will dynamically adjust costs based on the home plan's finished square feet, porch, garage and bathrooms.
Estimate will dynamically adjust costs based on unique zip code for project location.
All home plans are based on the following design assumptions: 8 foot basement ceiling height, 9 foot first floor ceiling height, 8 foot second floor ceiling height (if used), gable roof; 2 dormers, average roof pitch is 12:12, 1 to 2 covered porches, porch construction on foundations.
Summarized cost report will provide approximately 70 lines of cost detail within the following home construction categories: Site Work, Foundations, Basement (if used), Exterior Shell, Special Spaces (Kitchen, Bathrooms, etc), Interior Construction, Elevators, Plumbing, Heating / AC, Electrical Systems, Appliances, Contractor Markup. View a LIVE Sample Cost Report.
QUICK Cost-To-Build generates estimates only. It is highly recommend that one employs a local builder in order to get a more accurate construction cost.
All costs are "installed costs" including material, labor and sales tax.
* Limit one $24.95 credit per complete plan package order.
** Available for U.S. only.
Previous Q & A
Previous Questions and Answers
A: It’s 8’ poured walls so 7’9-1/2” clearance
A: 18’x8’ tall
A: Yes 8’ wall, and yes we have those in cab details on the plans.
A: Yes, there is a slab foundation option. 2” will be reduced on room sizes, which is typical for modifying the plans since we assume not everyone wants enlarge the house sq. footage.
A: It may appear as a room above because of the artists showing a light in the window but there is no plan with this
A: You would need to get an engineer to stamp and include his details for the wind requirements within your area. A lot of customers from florida order the cad files due to the strict requirements of the state of florida.
A: The window above the front porch is just for looks. That is attic space and we cannot specify the size of the attic space. There are pull down stairs in the mudroom area to access the attic but a HVAC contractor can move them to a different location if needed.
A: I’m pretty sure it’s vector because you have option to import into cad…etc
Common Questions:
A: Yes you can! Please click the "Modifications" tab above to get more information.
A: The national average for a house is running right at $125.00 per SF. You can get more detailed information by clicking the Cost-To-Build tab above. Sorry, but we cannot give cost estimates for garage, multifamily or project plans.
Designers/Architects that are interested in marketing their plans with us, please fill out this form
Our Low Price Guarantee
If you find the exact same plan featured on a competitor's web site at a lower price, advertised OR special SALE price, we will beat the competitor's price by 5% of the total, not just 5% of the difference! To take advantage of our guarantee, please call us at 800-482-0464 or email us the website and plan number when you are ready to order. Our guarantee extends up to 4 weeks after your purchase, so you know you can buy now with confidence.
Buy This Plan
Have any Questions? Please Call 800-482-0464 and our Sales Staff will be able to answer most questions and take your order over the phone. If you prefer to order online click the button below.
Add to cart
