|Total Living Area:||1319 sq ft|
|Main Living Area:||129 sq ft|
|Upper Living Area:||1190 sq ft|
|Garage Area:||1237 sq ft|
|Garage Type:||Drive Under|
|Number of Stories:||2|
|Max Ridge Height:||34'0 from Front Door Floor Level|
|Primary Roof Pitch:||2:12|
|Porch:||1730 sq ft|
|2nd Floor Laundry:||Yes|
|Main Ceiling Height:||14'6|
|Upper Ceiling Height:||9'0|
We are sorry, but an estimated cost build report is not available for this particular plan.
A: Chris You can show the builder the online version of the plan, or you can purchase the PDF study set. He should be able to give you a ballpark figure based on the information online https://www.familyhomeplans.com/plan_details.cfm?PlanNumber=51522 Steve
A: Your final plans WILL INCLUDE: a) Floor Plans: Floor plan drawings indicating dimensions for construction b) Roof Plan: Drawings indicating roof slopes and unique conditions c) Exterior Elevations: Drawings showing appearance and the types of materials used for the exterior finish and trim d) Building Sections: Drawings cut through important locations in the structure e) Construction Details: Drawings showing specific construction of building elements at a large scale f) Electrical Plans: Basic electrical layout (suggested locations of fixtures, switches and outlets) g) Foundation Plan: Dimensioned drawings describing specific foundation conditions for the structure h) A building license: A single-use license for construction at one location only (NOTE: If design is to be used at subsequent locations, a discounted re-use license is required and available upon request.) Additional notes about engineering and building codes: Our plans are designed to meet national building codes. We do not guarantee they will meet all local building requirements or building codes influenced by local geographic or climactic factors. It is the responsibility of the owner or builder to ensure these plans comply with city, county, municipal and/or state/provincial building codes. Additionally, your plans will not be sealed or stamped by an engineer or architect. It is the owner’s (or builder’s) responsibility to hire a local professional to review and seal or stamp the plans if required by the building department. This must be handled by an engineer or architect licensed in the state/province where the plan is to be built. At your service, Stev
A: Yes you can! Please click the "Modifications" tab above to get more information.
A: The national average for a house is running right at $125.00 per SF. You can get more detailed information by clicking the Cost-To-Build tab above. Sorry, but we cannot give cost estimates for garage, multifamily or project plans.
If you find the exact same plan featured on a competitor's web site at a lower price, advertised OR special SALE price, we will beat the competitor's price by 5% of the total, not just 5% of the difference! To take advantage of our guarantee, please call us at 800-482-0464 or email us the website and plan number when you are ready to order. Our guarantee extends up to 4 weeks after your purchase, so you know you can buy now with confidence.
Have any Questions? Please Call 800-482-0464 and our Sales Staff will be able to answer most questions and take your order over the phone. If you prefer to order online click the button below.Add to cart